At Ningbo Yibo Curtain Decoration Co., Ltd., we produce the zebra roller blinds fabric that a window covering maker uses to assemble a day night blind. The WFG-ZB04 is a semi blackout fabric in 100 percent polyester, with alternating sheer and solid bands. The finished width is 285 cm, the standard packing is a 50 m roll, and the sheer and solid repeat is 50 by 75 mm. Three colors are available in the range.

How a Zebra Blind Works

A zebra blind, also called a day night blind, uses two layers of fabric with alternating sheer and solid stripes. When the stripes line up, light passes through the sheer band and the room stays bright while the view is softened. When the blind moves, the solid band covers the sheer and the room darkens. The effect is controlled by the position of the blind, not by a separate curtain. The fabric repeat and the blind mechanism have to match, so the stripes align across the full width.

Fabric and Light Control

The semi blackout weave cuts glare and reduces the view from outside without making the room fully dark. That is a practical middle point for a living room, an office or a bedroom that needs privacy in the day and a softer light at night. The polyester fabric resists creasing and holds its colour. A buyer should compare the sheer band against a daylight sample, because the openness of the weave decides how much of the view remains visible.

Width and Packing

The 285 cm finished width suits a wide window or allows two narrower blinds to be cut from one roll. The standard 50 m roll is a practical length for a fabricator that makes several blinds. The 50 by 75 mm repeat should be confirmed against the blind system, because a different repeat changes the way the bands align. A buyer should also confirm the roll direction and the edge condition before cutting, as a fabric that is not square can cause a visible wave across a wide blind.

Where It Is Used

Zebra blinds are common in offices, apartments, hotels and living rooms. The day night effect is useful on a street-facing window where the owner wants light without a full view from outside. In an office, the blind can cut glare on a screen while keeping the room bright. In a bedroom, it can soften the morning light without a full blackout. The same fabric can be used with a manual chain, a spring system or a motor, depending on the blind mechanism.

Care and Installation

Dust the blind with a soft brush or a vacuum with a brush attachment. For a deeper clean, follow the fabric care instruction and avoid a strong solvent that could affect the coating or the colour. Do not pull the blind down by the fabric; use the chain or the motor. When the blind is installed, check that the fabric runs straight and the bands align. A blind that runs to one side is usually a mechanism or a bracket issue, not a fabric fault.

Choosing a Zebra Blind Fabric

A buyer usually compares the repeat, the width and the openness of the sheer band. A tighter sheer gives more privacy but less view; a more open sheer gives a brighter room but less screening. The color should match the window frame and the room, and the roll direction should suit the cutting plan. A fabric that is bought only by width can leave a repeat that does not line up with the mechanism.

Retail and Project

For a retail blind, the fabric is usually sold as a finished blind rather than a roll. The fabricator should keep the roll label and the batch number, because a later order in the same colourways needs a matching batch. For a project, a sample window and a flush detail should be agreed before the full order. A small trial on one window is the practical way to confirm the light control and the look.

Working With Yibo

Our product range covers roller blinds, zebra blinds, fabric curtains, vertical blinds, Roman blinds, cordless spring systems and blind accessories, with manual and motorized options. Buyers who need zebra roller blinds fabric can send the width, the color, the repeat, the roll length and the blind system. Our team will confirm the fabric, the packing and the delivery plan before quoting. A sample helps the fabricator check the light control and the band alignment before a bulk order.

Send us the window size and the light control you need, and we will reply with the recommended fabric, the quotation and the next steps. A clear brief on the blind system and the repeat at the start helps avoid a fabric that looks right but does not align on the finished blind.